Products

Contact Person : Ms. Zhang Kelly
Company Name : Shenzhen GLS Technology Co., Ltd.
Tel : 0086-755-28442807
Fax : 0086-755-28442784
Address : Guangdong,ShenZhen,2nd Floor, Jack Industrial Zone, SongYuanTou Industrial Area, BuJi
Country/Region : China
Zip : 518124

12V 600W Switch Power Supply

<< Previous Product

Next Product >>

Product Detailed

Related Categories:Switching Power Supply

1.600W switch power supply 2.Constant voltage 3.CE&RoHs approved 4.2 years warranty 5.EMI filter installed

Specification:

12V600W switch power supply,constant voltage

HS-600-12HS-600-13.5HS-600-15HS-600-24HS-600-27HS-600-48

Model
Specification
DC output voltage	12V	13.5V	15V	24V	27V	48V
Output voltage tolerance(Note:2)	±1%	±1%	±1%	±1%	±1%	±1%
Rated output current	50A	44.5A	40A	25A	22A	12.5A
Output current rage	0-50A	0-44.5A	0-40A	0-25A	0-22A	0-12.5A
Wave and noise(Note :3)	240mVp-p	240mVp-p	240mVp-p	240mVp-p	240mVp-p	300mVp-p
Inlet stability(Note :4)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load stablity (Note :5)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Efficiency	80%	80%	82%	82%	82%	84%
AC input voltage range	180-264VAC 47-63Hz;254-370VDC
Input current	6.5A/230V
AC INrush current	50A/230V
Leakage current	<3.5mA/240VAC
Overload protection	105%~135% hiccup mode, auto recovery
Over voltage protection	115%-135% cut off the output, auto recovery
High-temperature protection	ERH3>=65°C~70°C Fan on,<=55°C~60°CFan off,>=80°C~85°C,Cut off output(5~15V)Cut off output(5~15)~(24~48V)
Temperature coefficient	±0.03%/°C(0~50%)
Setup rise hold up time	200ms,100ms,20ms
Vibration	10~500Hz,2G 10min,/1cycle,Period for 60min,each axes
Withstand voltage	Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity	-20°C~+85°C,10%~95%RH
Overall dimension	238×124×65mm
Weight/Packing	1.5Kgs, 12pc/CTN
Note:1.The testing condition for the parameter above is :230VAC input,rated load,25°C70% RH.Humidity.2.Tolerance include the setting tolerance,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%.